Introduction to the structure of the flat knitting machine

According to its development, flat knitting machines include hand-operated flat knitting machines, electric flat knitting machines, computerized flat knitting machines, computerized flat knitting machines (computerized collar knitting machines, single-system computerized flat knitting machines, dual-system computerized flat knitting machines, etc.), but the industry generally says The most popular flat knitting machines are generally pointer knitting hand flat knitting machines.

The flat knitting machine is the main production equipment for woolen sweaters. The whole machine is composed of more than 130 parts. Computerized flat knitting machine

The grid is formulated according to its needle type and length, that is, there are several grooves in each inch (2.54cm) of the needle pointer board; the length is the total horizontal distance (inch) of the needle groove on the needle board, that is, the needle The effective length of the board. The specifications of the flat knitting machine are: 3x40, 7x40, 9X40, 12x40 and 14x40, the above numbers, the front number refers to the pointer type, and the back number refers to the length. (b) The main components of the flat knitting machine are the frame, needle plate, guide rail, faucet, and flower plate.

Frame: There are two hills, and two beams connect the hills into a whole, which is a casting. A wrench, a wrench fixing screw, a needle support plate screw, and a needle support plate screw compression spring are installed on the frame.

Needle plate: The steel plate is obtained by refined heat treatment of high-quality steel, which has considerable wear resistance and anti-rust ability. The slots are milled out, and there are large bead, small bead, machine needle, tofu block and fixing screw.

Guide rail: The guide rail is made of castings or special steel. It is fastened on the frame with fixing screws. It is generally divided into two pieces, the front and rear, which are the tracks for the machine head. There is also a yarn feeder guide rail above the rear guide rail, which is mainly used for It is used when the yarn feeder moves smoothly from side to side or when changing the yarn feeder.

Faucet: the heart of the flat knitting machine, on which all the parts of the machine head are installed. Its parts include the front and rear sliders, push handle burner balls and screws, push handle sliders, and bearings are installed on the sliders. The front part of the faucet is equipped with a three-eye cover plate. The screw passing through the three eyes is a triangular pull rod for needle opening, and the screw in the center eye is called a live chicken heart pull rod screw. The scale on the surface is called a scale plate, the scale plate is equipped with a green small pressure plate, and the screw in the center of the scale plate is called a double-ended screw. The lower ends of the screws at both ends are fastened on the big triangle, and the center of the screws at both ends is equipped with a watch pointer, and the ingot screw is mounted on the pointer. A shuttle rack is installed at the back of the faucet, a swing bar and a shuttle bar are housed on the shuttle rack, and a latch switch is also installed at the rear of the machine head, and the main parts above the machine head are flower plates.

Flower plate: The flower plate is the center of the flat knitting machine. It has a base plate and a panel structure. All the triangles are installed on the base plate. The triangles on the flower plate include needle-starting triangles, heart-shaped triangles, herringbone triangles, and large triangles.

According to its development, flat knitting machines include hand-operated flat knitting machines, electric flat knitting machines, computerized flat knitting machines, computerized flat knitting machines (computerized collar knitting machines, single-system computerized flat knitting machines, dual-system computerized flat knitting machines, etc.), but the industry generally says The most popular flat knitting machines are generally pointer knitting hand flat knitting machines.